Circle
A circle is easy to make:
Draw a curve that is "radius" away
And so:from a central point.
All points are the same distance from the center.
|
You Can Draw It YourselfPut a pin in a board, put a loop of string around it, and insert a pencil into the loop. Keep the string stretched and draw the circle! |
Radius, Diameter and Circumference
The Diameter starts at one side of the circle, goes through the center and ends on the other side.
The Circumference is the distance around the edge of the circle.
And here is the really cool thing:
So when the diameter is 1, the circumference is 3.141592654... |
Circumference = π × Diameter
Example: You walk around a circle which has a diameter of 100m, how far have you walked?
Distance walked = Circumference = π × 100m
= 314m (to the nearest m)
|
Diameter = 2 × Radius
And so this is also true:
Circumference = 2 × π × Radius
Remembering
The length of the words may help you remember:- Radius is the shortest word
- Diameter is longer (and is 2 × Radius)
- Circumference is the longest (and is π × Diameter)
Definition
The circle is a plane shape (two dimensional): And the definition of a circle is: |
The set of all points on a plane that are a fixed distance from a center.
Area
A = π r2
To help you remember think "Pie Are Squared"
(even though pies are usually round)
A = (π/4) × D2
Example: What is the area of a circle with radius of 1.2 m ?
A = π × r2A = π × 1.22
A = π × (1.2 × 1.2)
A = 3.14159... × 1.44 = 4.52 (to 2 decimals)
Area Compared to a Square
A circle has about 80% of the area of a similar-width square.
The actual value is (π/4) = 0.785398... = 78.5398...%
The actual value is (π/4) = 0.785398... = 78.5398...%
Names
Because people have studied circles for thousands of years special names have come about.Nobody wants to say "that line that starts at one side of the circle, goes through the center and ends on the other side" when a word like "Diameter" would do.
So here are the most common special names:
LinesA line that goes from one point to another on the circle's circumference is called a Chord.If that line passes through the center it is called a Diameter. A line that "just touches" the circle as it passes by is called a Tangent. And a part of the circumference is called an Arc. |
SlicesThere are two main "slices" of a circleThe "pizza" slice is called a Sector. And the slice made by a chord is called a Segment. |
Common Sectors
The Quadrant and Semicircle are two special types of Sector:Quarter of a circle is called a Quadrant. Half a circle is called a Semicircle. |
|
Inside and Outside
A circle has an inside and an outside (of course!). But it also has an "on", because you could be right on the circle. Example: "A" is outside the circle, "B" is inside the circle and "C" is on the circle. |
No hay comentarios:
Publicar un comentario